.38/.357 "ULTRALITE": DESIGNED TO BE USED ON A SPEAR GUN SHAFT OR AS A UNDERWATER PERSONAL PROTECTION DEVICE MOUNTED ON OUR 26" ROD & BALL ASSY. MANY SCUBA DIVERS PREFER THIS OVER OTHER DEVICES. WEIGHT: 2.2 OZ. THIS IS OUR MOST POPULAR UNIT!!! 6MM MOUNTING THREADS.

.38/.357 HD (HEAVY DUTY): THIS WAS THE FIRST POWERHEAD THAT (BUD THE BANGSTICK MAN) DESIGNED 18+ YEARS AGO. VERY POPULAR UNIT WITH GATOR HUNTERS. CAN BE MOUNTED ON A SPEAR GUN SHAFT, ROD & BALL ASSY., OR A WOOD DOWEL (POLE) USING OUR POLE MOUNT ASSY. WEIGHT: 3.7 OZ. 6MM MOUNTING THREADS.

.38/.357 DUAL SAFETY: THIS UNIT HAS A SCREW ON BARREL WITH A "BARREL LOCK" SO IT WON'T LOOSEN FROM VIBRATION. CHOICE OF 2 SAFETY'S. HAIRPIN OR THUMB NUT. WHICH EVER THE USER PREFERS. HAS A SPRING LOADED FIRING PIN. WEIGHT: 6.4 OZ. 6MM MOUNTING THREADS. ALSO CAN BE MOUNTED ON A SPEAR GUN SHAFT.

.44 CAL.: THIS IS ONE OF THE PREFERRED GATOR UNITS. ABOUT THE SAME VOLUME AS THE .38/357 MAG. CAN BE MOUNTED ON A SPEAR GUN SHAFT OR ANY OF OUR ROD & BALL ASSYS. MOST HUNTERS MOUNT THIS UNIT ON A WOOD DOWEL (POLE) 1-1/4" DIA. X 6' LONG, USING OUR POLE MOUNT. WEIGHT: 4.6 OZ. 6MM MOUNTING THREADS.

410 GA.: THIS UNIT IS VERY POPULAR IN ALASKA FOR HALIBUT FISHING. NORMALLY MOUNTED ON A WOOD DOWEL (POLE) USING OUR POLE MOUNT ASSY. IF DROPPED IN THE DRINK IT WILL FLOAT VERTICALLY. AMMO SHOULD BE SLUGS NOT PELLETS WHICH WOULD CONTAMINATE FISH. WEIGHT: 7.3 OZ. 6MM MOUNTING THREADS.

12 GA.: THIS UNIT IS VERY POPULAR IN SHARK FISHING. NORMALLY MOUNTED ON A WOOD DOWEL (POLE) 1-1/4" DIA. X 6' LONG. USING OUR POLE MOUNT. THIS UNIT HAS A VERY HIGH RECOIL!!! SHOULD NOT BE USED WITH ANY OF OUR ROD & BALL ASSYS.!!!WEIGHT: 9.5 OZ. 6MM MOUNTING THREADS.

.223 CAL.: THIS UNIT IS VERY VERSATILE. LOTS OF POWER. USED FOR SPEAR FISHING, GATOR HUNTING AND SHARK FISHING. THIS UNIT HAS A SCREW ON BARREL WITH A "BARREL LOCK" SO IT WON'T LOOSEN FROM VIBRATION. CHOICE OF TWO SAFETY'S. HAIRPIN OR THUMB NUT. WHICH EVER THE USER PREFERS. HAS A SPRING LOADED FIRING PIN. WEIGHT: 5.7 OZ. 6MM MOUNTING THREADS.

Powerhead Mounted on Silver Anodized 4 Foot or 6 Foot 1-1/4 pole

CAUTION - USE THIS EQUIPMENT AT YOUR OWN RISK.

All equipment manufactured by Caddo Machined Parts LLC. are in full compliance with ATF specifications.

It's the responsibility of the purchaser to maintain the integrity of the equipment so as to remain in compliance with ATF regulations.

Full instructions are shipped with every unit.

STANDARD THREAD SIZE 6MM OTHER THREAD SIZES ARE ALSO AVAILABLE ON REQUEST AT NO ADDITIONAL COST: 3/8-16, 5/16-18, 5/16-24. NOTE: When at check out request a different thread size in customer comment section..